[mason]

Hey Guys,

I may be doing something wrong. I was trying to use the compressor cable with my R1T, and I am confused about how to connect the cable to my wheel to inflate the tires. It is missing an air chuck. So I am considering buying this from Amazon: Amazon.com: SAFELIFE Brass Air Chuck Closed Flow Tire Chuck Heavy Duty Lock on Tire Inflator Chuck with Clip : Automotive .
Am I missing something? I feel like it should have been included in the kit Rivian sells. Appreciate any comments.

 

[Will0077]

It’s in the zipper pocket in the top of the case for the air hose!

 

[Joelster]

Yup. There is a small simple chuck in the zippered pocket.

 

[ColeAK]

On these lines has anyone used it to air up all 4 of the 20’s? Say from 20 psi to 45 psi? If so how long did it take? Did the compressor overheat?

 

[Riviano]

On these lines has anyone used it to air up all 4 of the 20’s? Say from 20 psi to 45 psi? If so how long did it take? Did the compressor overheat?

When I fill my all-terrain tires from 31 psi to 48 psi it takes about two and a half minutes per tire. No overheating on a summer day with temperature over 100F.

 

[evo7]

Hey Guys,

I may be doing something wrong. I was trying to use the compressor cable with my R1T, and I am confused about how to connect the cable to my wheel to inflate the tires. It is missing an air chuck. So I am considering buying this from Amazon: Amazon.com: SAFELIFE Brass Air Chuck Closed Flow Tire Chuck Heavy Duty Lock on Tire Inflator Chuck with Clip : Automotive .
Am I missing something? I feel like it should have been included in the kit Rivian sells. Appreciate any comments.

The tire chuck Rivian uses is the Lightning S-Series by JACO. It looks like this: Lightning™ S-Series Tire Air Chuck | Open Flow, 1/4" F-NPT (2 Pack)

 

[Patlenahan]

On these lines has anyone used it to air up all 4 of the 20’s? Say from 20 psi to 45 psi? If so how long did it take? Did the compressor overheat?

I've used mine several times for both my vehicle and our other 2 cars. Have had no problems once I got used to how it creeps up to the final pressure to make sure it doesn't over fill.