Rivian Forum – Rivian R1T & R1S News, Pricing & Order... banner
1 - 3 of 3 Posts

· Registered
1,126 Posts
Discussion Starter · #1 ·
When you install your racks, you will open a tab to unlock the rack and then lock the rack and close the tab. I have noticed some posts about wind noise coming from the racks, or tabs not closing. If your tabs do not fully close and "click" into a flush position, you should grab the base of the rack with two hands, have your thumbs on the tab, wiggle the rack fore and aft / up and down (while pressing in on the tab). You will easily get a "CLICK" and the tab will fully close.

These racks are really nicely engineered, and the tolerances for the tabs to close are tight. Hope that helps.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.