Did you have issues with your wheels rubbing the inner fender liner when in the lowest setting?
And I refer to my earlier post. Just put an order in for new wheels and tires. Continuing on what I said earlier, the new wheels are 9" wide, rather than the 8 1/2 stock wheel. So, went with a 285/60/20 tire instead of the original 275/65/20. This will bring me down to around 33 1/2 circumference, right in the middle of the 21's and 20"s from Rivian. Probably hardly noticeable, but that extra 1/2 inch could help with the proportions just a little and the extra 1/8" in space from the fender well might be just enough to make the difference in a slight rub with 20's and no rub at all. The 34 inch tires seem to be just a hair too large.21's are 33" diameter, the 20's are 34"
Sounds like they're still figuring that out. Some reviews I saw said the Rivian's speedometer was off by 3 MPH. Would make sense if it had the 20's on it and was programmed for the 21's, or vice versa.When I mentioned possibly getting new tires at some point to my guide today, she said if I were ever to do that to let Rivian Support know the new tire sizes. Apparently they can push down the new geometry OTA so the truck knows what it’s riding on.